• Available for all pulsation systems
• Easy clean foam filters
• 40mm mounting adapter

FC Cluster Washers

• Durable and economical
• Three rubber cup sizes suit most liners
• Adjustable flow rate
• Non return valve - optional extra
• 38mm, 50mm or remote mounting systems

Smart Controller

Liners

• A large range of liners to suit every application
• Large or standard bore models available
• Designed to fit 153mm long teat cups with 17mm holes

Smart ECR

SmartECR designed specifically for rotaries.

Never before has an electronic cup remover been able to do so much.  Apart from the obvious, SmarECT's can independently operate BailGates, SmartSpray and SmartD-Tect.

Development of our "New Generation" products is primarely based on an operating system called a "Controlled Area Network" or "CAN" as it is known.  In simplistic terms this offers a plug and play scenario whereby other Waikato products can be connected quickly and integrated easily into the overall milking system forming a totally batched equipment set.

Not only does SmartECR integrate seamlessly with other Waikato equipment, it has features not found in any other cup remover, anywhere in the world - features that translate into tangible benefits you can take advantage of.

- Designed specifically for rotary installation
- Adjustable pre and post milking delays
- Adjustable ram retraction speed
- Ezi pull-down
- Early milk out/kick off alert
- Milk sweep function
- Maximum cups on time setting
- Claw drip and lift function
- Controls BailGates
- Controls Waikato automatic platform teat spray system
- Systems diagnostics
- Global programming - from one master controller
- Up-gradable sofware

Ultimate

• With or without AutoStart
• Adjustable pre and post milking delay
• Adjustable ram retraction speed
• Ezi pull-down
• 75mm stainless steel rams
• Global programming
• Electronic

Smart Air Variable Speed Vacuum Pump Controller

• Digital sensors control vacuum level and optimise stability
• Precisely controls vacuum pump speed according to airflow demand
• Saves up to 47% of the power needed to operate the vacuum pump
• Five models available:  5 Kw, 7.5 Kw, 11 Kw, 18.5 Kw
• Adjustable acceleration and deceleration control response time
• Custom programs for different pump types
• Preserves pump life by minimising run speed
• Lower average pump speed makes for quieter operation

Spider

Spider Delux

Greenback Spider

Super Spider

Super Duper

The Impulse Air system is a unique milking technology. We introduce air behind the milk to efficiently move the milk away from the teat end. Air enters through a small calibrated air vent in the liner mouthpiece at the top of the teat while the cluster vent is blocked. Impulse Air liners reduce mouthpiece vacuum which results in much reduced teat congestion. The vacuum removes the milk without damaging the teat with no splash back of the milk keeping the teats dry during milking, this reduces the bacterial challenge. Impulse Air liners will significantly improve everyday issues such as mastitis, hyperkeratosis and SCC counts. The unique triangular liner shape will reduce liner slip due to a better grip on the teat. The triangular shape also gently massages the teat that results in the cows being much more relaxed for a calm milking environment. 

SmartSpray

The SmartSpray system was designed specifically for rotaries.

Teat spraying is a proven way to help in the prevention of mastitis and other teat related problems.  Hand spraying is the most common method used and one of the most laborious jobs performed during milking.

Waikato have developed an automatic teat spray system suitable for use on rotary platforms that is positioned in every bail and activated by a signal from an electronic cup remover.  Normally when a set of cups is removed by an automatic cup remover they are simply parked in the bail.  The advent of SmartECR's now permits the use of bail gates that are automatically raised so that cows can be released at the exit position.

With the integrated power of SmartECR's, when a cup remover activates it can also activate an automatic teat spray system.  Two spray nozzles carefully positioned in each bail cater for a wide variety of animal sizes.  The Smart Controller allowes you to program the spray duration and spray delay which means that all cows are sprayed with the right amount of teat spray at precisely the right time and soon after cluster removal.

A SmartSpray System is a unique and patented way to overcome the issues of manual teat spraying and ensures complete teat coverage no matter what position the cow is standing in the bail.

A 120 litre tank is mounted underneath the platform and combined with a special pumping system that maintains the correct spray pressure as well as fluid recirculation.  Spray pressure and spray pattern can be changed to suit your needs and refilling is completed easily from outside of the platform.

SmartWash

SmartWash  -  cleans up automatically

Hygiene is paramount on every dairy farm, after all, the food produced in your dairy effects the lives of people all around the world.

The method of cleaning milking machines is largely reliant on individuals charged with properly dispensing chemical and manually controlling the wash cycle.  Apart from saving valuable time, automating this function makes good sense and establishes a consistent wash process whereby the finest quality product can be assured.

SmartWash is an automated wash system with the flexibility to manage any wash scenario.  SmartWash controllers feature modern touch-screen displays that can be programmed to meet any wash requirement.  The design called for a user friendly interface whereby the system could be changed to suit the operators needs easily and quickly.  By working through a "step by step" menu on a large touch screen an operator can modify the wash programs almost infinitely.

- 3 High speed detergent pumps deliver up to 600 mls/min
- Compressed air operated valves
- Data logging capabilities
- Interlocks protect the system
- Temperature sensors included
- Detergent sensors are available

Powerful, 600 ml per minute, chemical pumps speed the wash process.  SmartWash is an innovative product.  It is the most flexible wash controller available.  Modern electronics, easy to follow programming menus and a user friendly touch screen have been successfully integrated to produce an automated wash system that can be installed with confidence onto any milking machine.

Vacuum Regulators

Supavac vacuum regulators are precision instruments designed to accurately control milking system vacuum.  Controlling milking systems vacuum within a set parameter is a prerequisite function of a good vacuum regulator.  Being able to maintain the set point accurately and dependably is something every Supavac regulator can do with mundane repeatability.

Several models are included in the product range suitable for both small and large installations.  Sleeve mount, BSP or NPT fittings allow flexibility for mounting and high flow models complete with slave regulators allow for remote sensing control up to 6m away from the sanitary trap.

Supavac vacuum regulators cover and airflow range from 2400LFA* up to 8200LFA at 50 kPa depending on the model selected. 

(* LFA = litres per minute of free air)

G2 Cluster Washers

• Strong one piece moulding
• 50mm or remote mounting system
• Easy to use flow rate adjuster
• Low-line opption available
• Non return valves in each quarter
• Three rubber cup sizes suit most liners

Milk Recovery System

A Waikato Milk Recovery System Mk2 is a device for ensuring that most of the milk in the milk delivery system is emptied into the bulk tank at the end of milking.  It is a pneumatic device with an electrical timer.

When activated the Waikato Milk Recovery System controller delivers air under pressure into the milk delivery line close to the milk pump.  As the air gently expands it pushes most of the residual milk from the delivery system into the bulk milk storage tank.  In a typical milking plant it will push between 70 and 80% of the milk left in the delivery system into the bulk tank.  Without a milk recovery system this milk would go to waste.

Over a full season the milk saved by such a system is equivalent to the production of four or five cows. 

Measuring Jugs

Ideal for measuring:

• Chemicals
• Poison
• Oil
• Water
• Milk

Features:

• Thick and durable
• Industrial strength
• Markings on outside of jugs
• Raised markings (markings will not rub off)

Available in six sizes:

• 250 ml
• 500 ml
• 1,000 ml
• 2,000 ml
• 3,000 ml
• 5,000 ml

Maxi Milk Filter

A Maxi Milk Filter is a vertical, top loading device with the capacity to filter milk from 520 cows.  For herds exceeding 520 cows, two or more Maxi Milk Filters can be used in tandem and joined by specially fabricated manifolds.  The strong, heavy duty enclosure of a Maxi Milk Filter ensures a complete seal and avoids distortion and leakage at this point.

A new hinged, swing-over top allows the retaining cap and saddle to be moved to one side parking the complete enclosure in a position that makes filter sleeve changing easier and more manageable.  A strong wire cage with three stainless steel spacers supports high quality Waikato filter sleeves that are retained by replaceable rubber filter sleeve retainers.

A choice of 50 or 63mm ferrule connections provide solid connection points for plumbing and are more than capable of containing the pumping pressures associated with modern high flow pump systems.

Maxi Milk Filters are manufactured to the highest standards.

BP 140 - Litres per minute < 2,750

BP 200 - Litres per minute > 4,500

BP 400 - Litres per minute > 6,500

BP 500 - Litres per minute > 10,000

Waikato MkV Milk Meter

The Wakato MkV milk meter is recognised worldwie for its integrity and performance.  Built to exacting specifications and ICAR accredited the Waikato MkV milk meter has a reputation second to none.  Used for oficial herd testing this meter will provide accurate and dependable measurements.

This is a precision instrument that when installed into the long milk tube between each milking unit and the pipeline will take a proportional milk sample from the milk flow.  The milk meter retains a small proportion of the yield in a calibrated flask from which the cow's total yield may be read, or the flask may be removed for weighing and the sampling ratio applied to obtain the milk yield.  The flask contents may then be gently agitated and a smaller representative sub-sample drawn off for milk composition analysis.  Waikato MkV milk meters can be cleaned in place after use and have a range of installation methods to suit most milking parlours.

Waikato MkV milk meters are an important management tool on any dairy farm.  With the regular use of milk meters a farmer can select high producing cows for breeding purposes or low producing cows for culling or those that require attention.  Knowing a cow's production, you are better equipped to make decisions around supplementary feed requirements.

Smartpuls

SmartPuls is a digital pulsation system packed with exciting features.
Modern technology has allowed us to develop smarter products than ever before.  SmartPuls is one of these products and is a digital pulsation system designed to produce accurate results time and time again.
New generation precision solenoids inside SmartPuls are smaller and have a greater life expectancy - now exceeding 200 million cycles.
Push-button digital circuit boards make SmartPuls easier to adjust.  Rates and ratios are selectable over a wider range and include options for cows, goats and sheep.
Brass screw inserts improve the integrity of the body housing and reduce maintenance cost over the life of the product.  Repairing or replacing key parts is easier and much faster than before.
A 16mm ID rear facing filtered air connection port is a standard feature on SmartPuls making installation of a filtered air system easier and faster.
SmartPuls has a built-in "C" phase adjuster that allows more control over the "C" phase length.  Customising the pulsation wave form to suit your herd can enhance milking performance.
24 volt regulated power supplies ensure consistency and delivers stable voltage to each pulsator continually throughout milking.
SmartPuls pulsators operate in a standard 2+2 configuration. 
There are four models available.

• Vacuum operated pulsator
• 4+0 configuration
• Mounting options up to 100mm
• Adjustable rate and ratios
• 1 Pulsator for 2 sets of cups

Waikato 320 claw

• Automatic or plain bowls
• Strong, robust and durable
• Stainless steel top and large bore nozzles
• 19mm milk outlet
• Interchangeable pulse block to suit a SmarD-Tect mastitis early warning system
• 4+0 and 2+2 configuration

24 Volt Air Injector

• Waikato electronic air injectors are powerful, adjustable and when fitted with a hush kit, very quite
• 32mm connection
• Digital adjustment
• Fit any milking system

• Pulsator filter
• Removable screen
• Protects pulsator from particle contamination

Waikato Speedsampler

Milk meters are an important management aid on any dairy farm.  With regular use they provide information on which to base feeding, breeding and culling decisions.  Quick, easy, fingertip activation triggers automatic agitation and ensures and accurate milk sample is taken every time.

The Waikato Speedsampler is a robust device that simplifies milk sampling for component analysis.  It uses the metering head of the Waikato MkV milk meter to accurately measure milk yield.  It is available either as a complete unit or as the milk sampler only ready to fit to and existing MkV milk meter.  The Waikato Speedsampler fits into the long milk tube between each milking unit and the milk pipline.  It directs a fixed proportion of the milk extracted from the cow directly into a calibrated flask.  Reading the flask gives the cow's milk yield.

The Waikato Speedsampler is provisionally approved by ICAR for use as a herd recording device.  It is easy to install with a reange of portable mounting options available.  It will measure milk yield up to 42 kg per cow and cleans in place at the end of milking.

Pond Stirrer

The 3 point mounted effluent pond stirrer is used to stir the pond prior to emptying. It has a multi-directional agitator, not a propeller, which minimizes bank scouring and tangling with any rubbish in the pond. It saves considerable time when loading and spreading and ensures even consistency with spreading effluent.

•   5 or 6.5 metres long
•   600mm x 300mm Multi Directional Agitator (not a Propellor)
•   Totally sealed taper roller bearings
•   Bearings run in oil
•   4 heavy neoprene seals running on a stainless shaft
•   Adjustable heavy duty ratchet top-link
•   Heavy duty drive shaft
•   Road wheels that swing out of the way when stirring
•   Safety clutch available

Flomax Centrifugal Milk Pump

• 1.1 Kw
• 1.5 Kw
• 3 phase 50/60 Hz

Milk Recovery System

• Compressed air operated